Agents that could be used in chemical and biological warfare tend to disperse widely in the air when released. Quickly collecting a concentrated sample of these agents is critical to detecting them before they reach harmful dose levels in the air. Also, methods of detection such as by polymerase chain reaction are enhanced when the collected agents remain alive.
Other collection devices using wet cyclone designs are larger and heavier, have higher power demands, and are noisy, thereby precluding unobtrusive uses. Devices using impactors for collection do not maintain the viability of live agents.
A reservoir at the bottom of the column contains liquid that is pumped up through the inside of the collection tube, which is charged at 8,000 volts. The liquid flows over the top of the charged tube and down the sides, collecting the ionized particles from the outside surface of the tube. The flow rate maintains a continuous film of liquid on the outer surface of the tube. Constant recirculation of the liquid through the tube concentrates the collected particles.
A valved sample loop enables diversion of the liquid to an online analyzer or to a sample vial for transport to a laboratory for analysis. With minimial pressure drop, the device consumes less than 12 watts of power and operates quietly.
The recirculating liquid can be customized for specific situations. A buffered saline solution or a nutrient solution will maintain biological agents in a viable state, enabling faster and more accurate analysis.
Applications and Industries
- law enforcement
- Coast Guard
- collects microorganisms, chemical agents, radioactive particles
- >90 percent collection efficiency
- collects particles of <0.3 to 10 micron diameters
- maintains viability of live agents
- 300 liters per minute flow rate
- consumes < 12 watts of power
- uses a 12 volt battery
- measures 6" x 10" x 21"